当前位 :希尼尔 页 > 译海拾 > 译文欣 > 工程图 与文档要求DCS ENGINEERING DRAWINGS AND DOCUMENTATION REQUIREMENTS

工程图 与文档要求DCS ENGINEERING DRAWINGS AND DOCUMENTATION REQUIREMENTS

原创文 :青岛希 尔翻译公 http://www..cn

2014-11-16

(非保 内容)

1. GENERAL

概述

 PROJECT STANDARD 项目标 AUTOMATION 自动化

 

The Distributed Control System vendor shall include detailed engineeing, including application  programming (configuration) and custom graphics displays in his scope of supply. Delivery shall include all drawings and documentation listed in this standard.

分布式 制系统的供应商必须提供详细的工程设计,包括应用程序(配置)和自定义图形显示。交货内容包括本标准列出的所有图 和文档。

a) All drawings provided by the vendor shall be computer generated using “AUTOCAD”  software ( version:  AutoCAD  2007,  minimum), unless otherwise approved by the   Owner. Vendor shall supply drawing files on CD ROM as well as hard copies of all drawings.

非另外 得业主的批准,供应商提供的所有图 必须是在电脑上采用“AUTOCAD”(版 :AutoCAD  2007,最低 求)软件制成的。供应商必须将图纸文件以及所有图 的硬拷贝保存在CD ROM上提供

All drawing formats and contents shall be as specified by the owner in the relevant project standards, unless otherwise approved.

除非另外征得批准,所有图 的格式与内容必须符合业主在相关项目标 中的规定。

b)  All  other  instrumentation  documentation  shall  be  computer  generated  using database, spreadsheet or word processing software, as applicable. Software specified to be used shall be the latest version of  MS-ACCESS, MS-EXCEL, MS-WORD. Any other software for documentation must first be reviewed and approved in writing by the Owner’s Instrument Engineer. Vendor shall supply document files on CD ROM as well as hard copies of all documents.

其它所 仪器文档均必须在电脑上采用适用的数据库、电子制表软件或文字处理软件制成。规定采用的软件必须是最新版本的,如MS-ACCESS、MS-EXCEL、MS-WORD。如果 用其它任何文档软件必须首先进行审查并征得业主仪表工程师的书面批准。供应商必须将文档文件以及所有文档的硬拷贝保存在CD ROM上提供

All documentation formats and contents shall be as specified by the owner in the relevant project standards, unless otherwise approved.

除非另外征得批准,所有文档的格式与内容必须符合业主在相关项目标 中的规定。

c) Multiple issues of drawings and documentation and at various levels will be made over the course of the project, as determined by the project requirements and  procedures. Final drawings and documents shall 100% complete, accurate, any “HOLD” clearly identified (generally there should be no HOLD’s at this point) and be issued as “Certified for Construction”. Vendors shall be fully responsible for timely removal of any and all HOLD’s placed on his drawings and documentation.

根据项 要求和程序,在项目进行过程中,进行图纸和文档以及各个层面上的各种事项。最终图纸和文档必须以精确的方式100%完成明 确定的(通常情况下,在这一点上没有待定尺寸)以及作为“施工证明”的“待定尺寸”。供应商全权负责按时清除图纸和文档上的所有待定尺寸。

2. LIST OF DRAWINGS

 

Item No.

Drawing Type

Description

 

1

 

System Architecture

Schematic

 

Single line schematic of the complete system

2

I/O  Termination   Cabinet

Drawings

Detailed internal layouts of the I/O termination and cross connection cabinets

3

Rack Room Hardware

Cabinet Drawings

Detailed internal layouts of the rack room equipment cabinets

4

Control  Room Equipment enclosure Drawings

Detailed internal layouts of the control room equipment consoles and cabinets

5

System AC and DC Power

Supply Drawings

Complete details of all DC and AC power cabling and wiring

6

Inter-Equipment/Cabinet

Wiring/Cable Schematics

Complete details of all inter-cabinet, console, peripherals, etc. cabling and wiring, including interfaces to control/monitoring systems supplied by others

7

System Grounding Drawings

Complete details of all system grounding

8

Equipment, Cabinets, Consoles, etc. Dimensional Drawings

Certified dimensional drawings of all cabinets, consoles, peripherals, furniture, etc.

9

I/O Mapping Drawings

System hardware input/output assignment maps

10

Configuration Drawings

Loop sheets or similar drawings detailing the complete operating software configuration for all areas

11

Simulation Drawings

Loop sheets or similar drawings detailing the complete simulation software configuration for all areas

12

Custom Graphics Drawings

Color reproductions of all custom graphics pages


2.  图纸目

 


项目标

自动化


项目编

图纸名

说明

 

1

 

系统结 示意图

 

整个系 的单线示意图

2

I/O端子柜

I/O端接和 叉式接线柜详细内部布局图

3

机架室 件柜图

机架室 备柜详细内部布局图

4

控制室 备外壳图

控制室 备控制台和设备柜详细内部布局图

5

系统交 和直流电源图

所有直 和交流电源电缆与电线布线的完整详图

6

设备/机柜之 的电线/电缆示 图

所有机 /控制台 外围设备等之间的完整详图,包括由其他方提供的控制/监控系 接口

7

系统接 图

所有系 接地的完整详图

8

设备、 柜、控制台等的尺寸图

所有机 、控制台、外围设备、装置等经确认的尺寸图

9

I/O映射图

系统硬 输入/输出分 图

10

配置图

对所有 域的全套操作软件配置进行详细说明的回路图表或类似的图纸

11

模拟图

对所有 域的全套模拟软件配置进行详细说明的回路图表或类似的图纸

12

自定义 形图纸

所有自 义图纸页面的色彩再现

  

3. LIST OF DOCUMENTS

 

Item No.

Document Type

Description

 

1.

 

Schedule

 

Time schedule of engineering, manufacturing, testing, delivering, installing, checking out  and commissioning of the complete system hardware and software

2.

List     of      Drawing      and

Documents

This list shall identify all drawings and documents produced,  listed          in                  numerical  order          by drawing/document number and have description and work package number (as applicable). The drawing list shall be provided as a complete list at the start of the project.

3.

Documentation   Deliverable

Schedule

Schedule of all drawings/documents, sorted by

drawing / document     number and listing: drawing/document number, description, issue stage  (i.e.:  Preliminary, Review, Approval, Certified), status, scheduled issue date, actual issued date, document package number, work package number. This list shall be maintained on

a monthly basis (or more frequently as required by the project).

4.

Site Installation Manuals

Details of all system installation requirements and recommendations

5.

Equipment    Heat    Loading

Tables

Heat loading values for all system equipment

6.

Equipment     Power     usage

Tables

Power usage values for all system equipment

7.

Equipment Weight Tables

Physical weights for all equipment, cabinets, consoles, peripherals, etc.

8.

I/O Assignment Lists

Termination listings for all configured system inputs and outputs, including cross connections

9.

System cable/wiring

Schedules

Schedules of all system cables and wiring excluding I/O wiring

10.

Tag Lists

Listing of all configured tags including all related data

11.

Console configuration documentation

All documentation related to configuration of the operator consoles

12.

Program listings and Source codes

Program listings and source codes for all control software

13.

System loading calculations

Calculations showing all of the system’s RAM and hard drive usage, CPU free times, bus activities, etc.


3. 文档目

 

项目编

文档名

说明

 

1.

日程计

整个系统硬件与软件设计、制造、测试、交货、安装、检验、试运行的日程计

2.

图纸文 目录

该目录 确定所有图 和文件,按照图纸/文件编号的数字顺序排列,并且附说明和工作包编号(若有)。项目开始时,必须提供完整的图纸目 。

3.

文档交付日程计

所有图 /文档的日程计 ,按照图纸/文档的

编号和 录分类:图纸/文档编 、说明、发行阶段(即:预审、审查、批准、确认)、计划发布日期、实际发布日期、文件包编号、工作包编号。必须每月(或者按照项目要求确定更 高的频率)制定该目录。

4.

现场安 手册

 

所有系 安装要求和建议的详细内容

5.

设备热 荷表格

所有系 设备的热负荷值

6.

设备用 量表格

所有系 设备的用电量

7.

设备重 表格

所有设 、机柜、控制台、外围设备的物理重量

8.

I/O分配目

所有配 系统输入和输出的端接列表,包括交叉连接

9.

系统电 /电线布 图

所有系统电 和电线的布局图,不包括I/O配线

10.

标签列

所有配 标签的立标,包括所有相关数据

11.

控制台 置文档

与操作 控制台配置有关的所有文档

12.

程序表 源代码

用于所 控制软件的程序表和源代码

13.

系统加 计算

有关所 系统RAM和硬盘 用、CPU空闲时 、总线活动性的计算

希尼尔 译公司